Ford 331 Engine Specs (BPF3310CTC)

BP3472CTC_med

330 HP/360 ft/lbs
$4,895.00

order_button_orange

toll_free_order

 

 

 

 

          
PART NUMBER: BPF3310CTC
BLOCK:
  • Hand picked 2 bolt seasoned 302
  • Square and parallel decked
  • Align honed main bearing bore
  • Cylinders honed on computer controlled machine to within .0002 straightness and roundness
ROTATING ASSEMBLY:
  • New cast steel crankshaft
  • Hypereutectic pistons
  • Hastings Moly rings
  • Rotating assembly balanced to within 2 grams
  • Melling high volume oil pump
  • Hydraulic roller camshaft
  • Cloyes double roller timing chain
  • Camshaft is degreed to ensure maximum horsepower
CYLINDER HEADS:
  • Cast iron
  • Hardened retainers and springs
  • 1.94 swirl polished intake valves
  • 1.60 swirl polished exhaust valves
A TON OF EXTRAS:
  • Dual plane satin intake manifold
  • Fuel pump
  • Fuel line and filter
  • Water pump
  • 600 cfm carburetor
  • Harmonic balancer
  • Timing cover and valve covers
  • Front sump oil pan
  • Brass Freeze Plugs
  • Distributor
  • Spark plugs
  • Blueprint plug wires
  • Dyno tested – and shipped with results
CRITICAL SPECS:
CAM: .543 Int / .554 Exh & 218 Int / 226 Exh duration @ .050 - 112 degree lobe sep
HORSEPOWER: 330 @ 5600 rpm
TORQUE: 360 @ 3800 rpm
COMP. RATIO: 9.5 to 1  (Requires 91 octane fuel)
IGNITION TIMING: 34 Degrees Total (at 4000 RPM)
WARRANTY: 30 month / 50,000 mile

NOTES: This engine requires a 28oz weighted flexplate/flywheel.

Blueprint Engines recommends a 2000- 2400 rpm stall converter.