Ford 347 (BP3471CT) Engine Specs

BP_3471CT_med

410 HP/410 ft/lbs
$5,995.00

order_button_orange

toll_free_order

 

 

 

FORD_347_BP3471CT_dyno

          
PART NUMBER: BP3471CT
BLOCK:
  • Hand picked seasoned blocks bored .040 over
  • Square and parallel decked
  • Align honed main bearing bore
  • Cylinders honed on computer controlled machine to within .0002 straightness and roundness
  • Cylinders are sonic tested for thickness
ROTATING ASSEMBLY:
  • New SCAT forged crankshaft
  • New SCAT rods w/ 150,000 psi bolts
  • New PROBE forged pistons
  • Hastings Moly rings
  • Balanced rotating assembly
  • Melling high volume oil pump
  • Roller camshaft
  • Heavy duty double roller timing set
  • Comp Cams Pro Magnum roller rockers
CYLINDER HEADS:
  • Performance aluminum heads
  • 1.437 diameter valve springs
  • Hardened retainers and springs
  • 2.02 swirl polished intake valves
  • 1.60 swirl polished exhaust valves
  • Hardened push rods
A TON OF EXTRAS:
  • Professional Products polished aluminum intake manifold
  • 9.5 to 1 compression
  • Signature series aluminum valve covers
  • Brass freeze plugs
  • Dyno tested – and shipped with results
  • Comes with 30 month / 50,000 mile warranty
CRITICAL SPECS:
CAMSHAFT: .544 Int / .555 Exh & 216 Int / 224 Exh duration @ .050 - 112 degree lobe sep.
HORSEPOWER: 410
TORQUE: 410
COMP. RATIO: 9.5 to 1
IGNITION TIMING: 13 to 16 Degree Initial / 34 Degree Total
WARRANTY: 30 month / 50,000 mile
NOTES:

An 1800-2200 stall converter is recommended with this engine.

You must use a 28oz weighted flywheel/flexplate for the correct balance of the engine.