GM 383 Engine Specs (BP3832CTC1)

BP3832CTC1_med

310 HP/360 ft/lbs
$3,395.00

order_button_orange

toll_free_order

 

 

 

 

          
PART NUMBER: BP3832CTC1
BLOCK:
  • 4 Bolt main, 1 piece rear main seal
  • Passenger side dipstick
  • Align honed main bearing bore
  • Cylinders honed on computer controlled machine to within .0002 straightness and roundness
  • Cylinders are sonic tested for thickness
ROTATING ASSEMBLY:
  • New cast steel crankshaft
  • Hypereutectic pistons
  • Chevy heavy beam rods with 150,000 PSI bolts
  • Hastings moly rings
  • Melling high volume oil pump
  • Hydraulic flat tappet cam
  • Heavy duty double roller timing set
CYLINDER HEADS:
  • BluePrint premium center bolt cast iron
  • Hardened retainers and springs
  • 2.02 swirl polished intake valves
  • 1.60 swirl polished exhaust valves
A TON OF EXTRAS:
  • 9.5 to 1 Compression
  • New valve covers, oil pan and timing cover
  • Aluminum intake manifold
  • HEI distributor
  • 750cfm carburetor
  • Brass freeze plugs
  • Dyno tested - shipped with results
CRITICAL SPECS:
CAM: .480 Int / .486 Exh & 229 Int / 230 Exh duration @ .050
HORSEPOWER: 310 @ 5200
TORQUE: 360 @ 3800
COMP. RATIO: 9.5:1  (requires 91 octane fuel)
IGNITION TIMING: 34 degrees total (at 4000 RPM)
WARRANTY:
 30 month / 50,000 mile
NOTES:

THIS ENGINE WILL NOT WORK FOR APPLICATIONS REQUIRING EGR

This engine requires a 400ci weighted harmonic balancer, and late 350ci weighted flexplate/flywheel.

BluePrint Engines recommends a 2000- 2200 rpm stall converter.